- Alpine Touring Skis
- Ski Touring Boots
- Backcountry Ski Bindings
Place under the toe piece of your binding if you prefer a smaller ramp angle. Raises your toe piece by 4mm.
Raised edges snap securely onto the bottom of the above bindings for a wiggle free fit.
The AL12 Toe Shims also work with the Hagan Boost 12 and ATK Front 12, but it isn't a perfect fit as there aren't slots for one of the raised edges. For a perfect fit, that raised edge can be ground off.
The AL12 Toe Shims are a marginal fit with the Hagan Pure 8 and 10, Pin Up 8 and 10 and Ultra World Cup bindings. There are matching holes for just the front two screws. The rear screws fit just inside the large center hole, but there are no dedicated screw holes. The shim will extend well past the foot print of the toe pieces, so it definitely won't be a "pretty" solution.
The AL12 Toe Shims do not work with the ATK Raider 11/13/15 Evo. For those you need the AL14 toe shim.