ATK SLR Release Binding

Size Guide

1 item left

Release
  • The ATK SLR RELEASE introduces a new binding concept, a brand new segment in the touring field: extremely low weight and adjustable retention force are combined with unprecedented synergy, offering maximum performance that is simultaneously minimalist and refined.

    The toe piece is derived from the race bindings to be lightweight and high performing. The highly innovative heel provides lateral release that is adjustable between 5 to10 settings via a simple screw. Vertical release is fixed, but can be selected from 4 different (and interchangeable) steel “U” springs with release values: 4, 6, 8, 10.

    The SLR Release binding is offered in 4 levels of defined vertical and lateral release, driven by the steel “U” spring and a spring system housed into the heel part:

    SLR Release 4: adjustable vertical release, lateral release U spring value 4
    SLR Release 6: adjustable vertical release, lateral release U spring value 6
    SLR Release 8: adjustable vertical release, lateral release U spring value 8
    SLR Release 10: adjustable vertical release, lateral release U spring value 10

    The SLR Release is just 135 grams, thanks to impressive CNC machining and Monolink Technology®—toe springs only on one side!  The other lever arm is solid. A polymer wheel bearing eases locking and releasing the toe piece.

    • Weight: 135 grams
    • Made of ultra-light aluminum with steel U-springs.
    • Automatic Semi-Lock System.
    • MONOLINK TECHNOLOGY 1.0: Only one of the toe arms has springs. This provides higher clamping stiffness in addition to lower weight.
    • “Easy entry system” for even better boot step-in performance with extremely reactive and powerful closure and a new front lever that provides more comfortable locking and unlocking, with a "dimple" for the pole tip for using your ski pole to release the toe piece.
    • Polymer wheel bearing for easy toe locking and unlocking.
    • Crampon attachment slots and safety leashes included.
    • Adjustable Heel Pin Cover System - easily adjust the rotation of the heel cover to your desired resistance.
    • Ski brakes and replacement parts available.
    • Sold in sets of two, including screws and a paper mounting template.
    • The heel part offers 3 walking modes: FLAT and 37mm and 50mm RAISED Modes.
    • The heel piece rotates both directions (360°) in order to reach the walking modes.
    • The steel “U” spring can be switched with different pre-loaded springs (available values 4,6,8,10).

     

    The ATK SLR Release includes crampon slots and safety leashes. Lightweight aluminum crampons are available in four widths. 30mm and 60mm adjustment plates are also available. For inbound use, a lightweight universal ski brake (easily removable and reinstall-able) is also available.

    Check and adjust the tightness of the Heel Pin Cover System periodically! Heel Pin Cover Plate rotation needs to be sufficiently tight so that the plate stays in place, either fully closed (uphill mode) or fully open (downhill mode). Adjust the tightness of the cover plate with a #10 Torx wrench. If the plate is too loose, it can rotate into a upright position, and subsequently break when a boot steps down on it.

    Heel pin cover plate breakage is not covered under warranty, because it is preventable with simple regular maintenance, but we provide replacement cover plates at low cost.

  • R01 30mm Adjustment Plate
    R04 60mm Adjustment Plate
    Ski Brake
    Safety Leash
    75mm and 91mm Crampons
    Replacement Heel Plates
    Replacement U-Springs


×

Current price is:


Tell me when the price is:

-10%

-20%

-30%

2016-2017 Hagan Ski Overview and Data Sheet
2016-2017 Hagan Ski Overview and Data Sheet